Congratulations on your purchase of a Diomedes Industries custom leather sheath. Made from 100% American veg tanned leather, your sheath was built with the craftsmanship that should provide a lifetime service. Leather, however, is a ‘living’ product, some care will be required to maintain top performance.
The exterior of your sheath was sealed with Montana Pitch Blend (MPB) Leather Dressing. This product is American made and contains bees wax, pine pitch, and mink oil. This provides the proper protection and oils to keep your sheath in top shape for some months. From time to time your sheath will need to be cleaned, oiled, or even re-protected to prevent drying, cracking, or moisture absorption.
Fill a bowl with warm (not hot) water and remove any obvious dirt from the sheath with a clean boot brush.
Wet and ring out a soft clean towel. Drizzle a small amount of MPB Leather Oil Soap onto a wet, clean, soft cotton towel. (If you do not have Leather Oil Soap - simply use a small amount of Dawn dish soap in your water the bowl in step 1)
Swirl towel with soap directly onto the leather to lather as you work gently into skin.
Rinse towel and ring out any excess water. Return to the leather to rinse and dilute remaining soapy water.
With a second clean, lint-free cloth, wipe leather and wick up any excess liquid.
Place sheath on towel and allow to dry in room temperature. Do not apply heat to speed drying.
Add a small amount of Leather Oil or Dressing into the palm of your hand then massage directly into leather. (If you are using Leather Oil - less is more - be careful not to over-oil)
Apply a thin, even coat (no need to over-apply)
Allow to dry over night
Finish by buffing briskly with a clean, dry, lint-free cloth or boot brush to help even out your application and remove any excess oil. (This step is important as excess oil or dressing will attract dirt.)
If your sheath came with Chicago Screws (solid brass and nickel plated) or a removable dangler (solid metal cast and nickel plated), you may want to secure these screws with a drop of temporary loc-tite. I assemble all danglers with blue loc-tite, but cannot guarantee them from backing out. Always check these before embarking on your adventures.
Pocket clip is made from tumbled stainless steel. Keep clean and dry.
Never insert a wet dirty knife back into the sheath. Cleaning game is one of the times when a sheath can take serious abuse. Wipe your knife clean before inserting it back into the sheath.
Never use petroleum products on your sheath. Do not use any product on your leather that you would not also place on your own skin. Leather is skin after all.
In addition to potentially molding and breaking down, leather is particularly susceptible to damage / marks while damp.
Do not use a leather sheath for long term knife storage as moisture can greatly effect the steel of the knife.
Every effort has been made to ensure that oils or dye does not transfer from leather to clothing or the knife itself. However, some dyes (black for instance) are particularly giving. The first few uses of a knife sheath should be done with clothing that you won’t mind becoming soiled in case this happens. Should your knife handle get some dye on it – generally rubbing alcohol will take this off with little issue. However, always refer to the manufacturer’s care instructions for their knife handles.
Always use care when sitting with any sheath and particularly reinserting the knife inside of the sheath. These are the two times when knives are more likely to cut through the sheath, and damage the user. As always, use caution when using any knife and / or sheath.
Sign up to get the latest on sales, new releases and more …
GET NEW KNIFE PREVIEWS
We'll notify of you of new releases before they go live on the site!